واردات و فروش ماژول سیسکو Module Cisco HWIC-4ESW-POE
Product detail:Nine port 10/100 Ethernet switch interface card Cisco Router High-Speed WAN Interface card
The 4- and 9-port Cisco EtherSwitch 10/100 high-speed WAN interface cards (HWICs) supported on the Cisco 1800 (modular)/1941, Cisco 2800/2900, and Cisco 3800/3900 series integrated services routers offer small-to-large-size businesses and enterprise branch office customers the option to integrate switching and routing in one device. This combination offers ease of configuration, deployment, and management while using the powerful characteristics of Cisco routing and Cisco Catalyst switching features.
The modular 4- and 9-port Cisco EtherSwitch HWICs provide line-rate Layer 2 switching across Ethernet ports using Cisco IOS Catalyst Software. The 4-port Cisco EtherSwitch HWIC has four 10/100 switched Ethernet ports, with options for inline power support on all four ports. The 9-port Cisco EtherSwitch HWIC has nine 10/100 switched Ethernet ports, with options for inline power support on 8 of the 9 ports. The ninth port does not support inline power but can be used as a regular switch port for trunking and other normal data applications. Features such as port autosensing, quality of service (QoS), VLAN support from 802.1P and 802.1Q standards, and 802.1D spanning tree protocols are standard on the Cisco EtherSwitch HWIC. The Cisco EtherSwitch HWICs are available in standard 4- or 9-port 10/100BASE-TX switch HWIC and Power-over-Ethernet (PoE) configurations. The PoE configurations consist of a 4- or 9-port 10/100BASE-TX switch and a 4- or 8-port inline power module daughter card. The power module daughter card houses a power controller for detecting, classifying, and enabling power on 802.3af-compliant powered devices attached to the HWICs. The inline powered version of the Cisco EtherSwitch HWIC can power Cisco IP phones, Cisco wireless access points, or any other IEEE 802.3af-compliant device. The optional inline power support on the 4- and 9-port HWICs on the Cisco 2800/2900 and Cisco 3800/3900 series of integrated services routers requires the use of a field-replaceable inline power supply.
HWIC-4ESW-POE Specifications 4-port Cisco EtherSwitch 10BASE-T/100BASE-TX autosensing HWIC with power daughter card Manufacturer Cisco Part Number HWIC-4ESW-POE Device Type Expansion module Form factor Plug-in module Interfaces/Ports 4 x RJ-45 10/100Base-TX Auto-sensing/Auto-negotiating/Auto MDI/MDI-X Connectivity Media Category 3 UTP 10Base-T Category 4 UTP 10Base-T Category 5 UTP 10/100Base-TX Data Transfer Rate 10 Mbps Ethernet Half/Full-duplex 100 Mbps Fast Ethernet Half/Full-duplex I/O Expansions Power Daughter Cards 4-port inline power module (ILPM-4=) The 4- and 9-port Cisco EtherSwitch HWICs (part numbers HWIC-4ESW and HWIC-D-9ESW) are managed 10/100BASE-T Layer 2 switches in a HWIC form factor for the Cisco Integrated Services Routers. The 4-port HWIC comes in a single-wide form factor, and the 9-port HWIC in a double-wide form factor. The switch supports the IEEE 802.1D Spanning Tree Protocol and can be used to connect up to 4 or 9 LANs with up to 15 IEEE 802.1Q-based VLANs (802.1Q). Note: Both HWICs-the 4- and 9-port HWICs-support up to 15 VLANs. They also can be optionally configured to provide 4 or 8 ports of inline power for 802.3af- or Cisco PoE-capable devices. The PoE support is not available on the Cisco 1841 router. Specifications Target Applications Data, voice, and video Supported Router Platforms Cisco 1800 (modular), Cisco 2800, and Cisco 3800 series integrated services routers, Cisco 1841 (supports HWIC-4ESW only; no PoE support), Cisco 2801, Cisco 2811, Cisco 2821, Cisco 2851, Cisco 3825, Cisco 3845, Cisco 1941, Cisco 2901, Cisco 2911, Cisco 2921, Cisco 2951, Cisco 3925, Cisco 3945 Form Factor HWIC-4ESW = Single-wide HWIC form factor Dimensions (W x D x H) HWIC-4ESW = 3.08 x 4.74 x 0.76 in. Weight HWIC-4ESW-POE = 108 grams (0.24 lb) Standards IEEE Protocols Ethernet: IEEE 802.3, 10BASE-T Fast Ethernet: IEEE 802.3u, 100BASE-TX IEEE 802.1d Spanning Tree Protocol IEEE 802.1p CoS for Traffic Prioritization IEEE 802.1q VLAN IEEE 802.1x Security IEEE 802.3x Full Duplex IEEE 802.3af Power over Ethernet Standard RFC RFC 2284, PPP Extensible Authentication Protocol (EAP) Manageability SNMP and Telnet interface support delivers comprehensive in-band management, and a CLI management console provides detailed out-of-band management RMON, SPAN, TFTP, NTP Environmental Operating Temperature 32 to 104°F (0 to 40°C) Operating Humidity 10 to 85% noncondensing operating
VN:F [1.9.22_1171]ماژول سیسکو Module Cisco HWIC-4ESW-POE,